Improves safety at work
Made from new generation vegetable-based esters
Fully biodegradable
Use undiluted
Formula adapted to prevent damage to roadways under construction
DESCRIPTION
SOLVETAL® 5050 is a concentrated fluid for de-bituminizing and anti-sticking treatment, for the transport and application of road surfaces.
SOLVETAL® 5050 is a cleaning fluid specifically developed to replace low flash point or smoke generating vegetable-based esters. It immediately meets the expectations of Branch Managers, Safety Coordinators and Operations and Site Managers, not only in terms of safety at work, hygiene and the environment, but also in terms of performance and compatibility with the equipment and its environment
Download the data sheet
MSDS available on request
PHYSICAL AND CHEMICAL PROPERTIES
|
PROPERTIES
|
VALUES
|
UNITS
|
|
Appearance
|
Liquid
|
-
|
|
Solubility in water
|
0
|
%
|
|
Colour*
|
-
|
-
|
|
Odour
|
Weak
|
-
|
|
Density at 25°C
|
895
|
kg/m3
|
|
Freezing point
|
-20
|
°C
|
|
Kinematic viscosity at 40°C
|
10.5
|
mm²/s
|
|
Refractive index
|
1.4620
|
|
|
PERFORMANCE CHARACTERISTICS
|
|
PROPERTIES
|
VALUES
|
UNITS
|
|
De-bituminizing time
|
6'30''
|
mn.sec
|
|
Fuel oil de-bituminizing time
|
5'45''
|
mn.sec
|
|
FIRE SAFETY PROPERTIES
|
|
PROPERTIES
|
VALUES
|
UNITS
|
|
Vacuum flash point
|
>170
|
°C
|
|
Self-ignition point
|
>300
|
°C
|
|
Lower explosive limit
|
Non-explosive
|
% (v/v)
|
|
Upper explosive limit
|
Non-explosive
|
% (v/v)
|
|
Vapour pressure
|
<0.01
|
kPa at 20°C
|
|
Content of explosive, oxidizing, flammable, highly or extremely flammable substances
|
Total absence
|
-
|
|
TOXICOLOGICAL PROPERTIES
|
|
|
PROPERTIES
|
VALUES
|
UNITS
|
|
Iodine value
|
<100
|
g/100 g
|
|
Totox (Anisidine Index + 2x Incide Peroxide)
|
48.56
|
-
|
|
Accelerated oxidability test (Rancimat test)
- Flow rate
- Temperature
- Time
|
10
100
2.6
|
L/h
°C
h
|
|
Content of toxic, very toxic, carcinogenic, mutagenic, reprotoxic, harmful, irritant or corrosive substances
|
Total absence
|
-
|
|
Limit value and average exposure (VLE and VME)
|
without
|
ppm
|
|
ENVIRONMENTAL PROPERTIES
|
|
|
PROPERTIES
|
VALUES
|
UNITS
|
|
Biodegradability
|
Easily biodegradable
|
-
|
|
VOC (Volatile Organic Compounds) content
|
0
|
%
|
|
Solvent content
|
0
|
%
|
|
Environmentally hazardous substances content
|
Total absence
|
-
|
|
PRECAUTIONS FOR USE
Store under cover in temperate environments before use.
Do not apply the product in large quantities or using a drum. Preferably use a sprayer.
In case of any accidental spillage on newly laid surfaces, rinse the surfaces immediately and thoroughly with water. The primary function of this product is to remove bitumen.
Do not apply to asphalt before and after laying.
Use undiluted. Do not mix with fuel oil, which is classified as carcinogenic.
Do not use as a bodywork detergent.
APPLICATIONS
| FUNCTIONS |
SUPPORTS (equipment or hardware) concerned
|
|
De-bituminizing
|
►Spreader booms and emulsion circuits for integrated boom finishers
►Borders
►Soiled tools (rake handles and teeth, shovels, etc.)
►Soiled clothes
►Soiled gloves
►Soiled shoes
|
|
Anti-stick
|
►Finisher table
►Profiler conveyor ledger
►Finisher feeder and feed screw
►Finisher belt
►Loader buckets carrying asphalt
►Sleds for CMA machines
►Tools (scrapers, shovels, rakes, etc.)
►Manhole top plates
►Shoes
►Vibrating plates
|
DIRECTIONS FOR USE
Spray a fine mist on the surfaces to be treated.
To remove asphalt deposits, leave for several minutes and then rinse with a high-pressure cleaner.
PRESENTATIONS
|
Container GRV 1000 L
|
Drum 200 L
|
Can 20 L
|
Download the data sheet
MSDS available on request
PHYSICAL AND CHEMICAL PROPERTIES
|
PROPERTIES
|
VALUES
|
UNITS
|
|
Appearance
|
Clear
|
-
|
|
Colour*
|
Yellow-orange
|
-
|
|
Odour
|
Light, characteristic
|
-
|
|
Density at 25°C
|
875
|
kg/m3
|
|
Freezing point
|
-20
|
°C
|
|
Solubility in water
|
0
|
%
|
|
Kinematic viscosity at 40°C
|
5
|
mm²/s
|
|
Surface tension
|
32
|
Dynes/cm
|
|
Refractive index
|
1.4570
|
|
|
Solvent power
Kauri Butanol index
|
>200
|
-
|
|
Acid value
|
<1
|
mg(KOH)/g
|
|
Iodine value
|
<120
|
gI2/100g
|
|
Water content
|
< 0.2
|
%
|
|
FIRE SAFETY PROPERTIES
|
|
PROPERTIES
|
VALUES
|
UNITS
|
|
Flash point (vacuum)
|
>170
|
°C
|
|
Self-ignition point
|
>250
|
°C
|
|
Lower explosive limit
|
Non-explosive
|
% (by volume)
|
|
Upper explosive limit
|
Non-explosive
|
% (by volume)
|
|
Content of explosive, oxidizing, flammable, highly or extremely flammable substances
|
Total absence
|
%
|
|
TOXICOLOGICAL PROPERTIES
|
|
PROPERTIES
|
VALUES
|
UNITS
|
|
Anisidine value
|
<5
|
-
|
|
Peroxide value
|
<10
|
meq(O2)/kg
|
|
TOTOX (anisidine value + 2x peroxide value)
|
<25
|
-
|
|
CMR, irritating and corrosive substance content
|
Total absence
|
%
|
|
Residual methanol content from transesterification
|
0
|
%
|
|
Emissions of hazardous, CMR, irritant, corrosive compounds at 160°C.
|
0
|
%
|
|
Limit value and average exposure (VLE and VME)
|
without
|
ppm
|
|
ENVIRONMENTAL PROPERTIES
|
|
|
PROPERTIES
|
VALUES
|
UNITS
|
|
Water endangering
|
1
|
class
|
|
Primary biodegradability CEC 21 days at 25°C
|
over 90
|
%
|
|
Easy biodegradability
OECD 301 A over 28 days
Disappearance of the DOC
|
over 80
|
%
|
|
Easy and ultimate biodegradability
OECD 310 C over 28 days
Biodegradation at 67 days
|
over 90
100
|
%
%
|
|
Bioaccumulation
n-octanol water partition coefficient
|
less than 3
|
log Kow
|
|
Vapour pressure at 20°C
|
<0.1
|
hPa
|
|
VOC (Volatile Organic Compounds) content
|
0
|
%
|
|
Solvent content
|
0
|
%
|
|
Environmentally hazardous substances content
|
Total absence
|
%
|
|
Content of compounds with a GWP
|
0
|
%
|
|
Content of compounds with an ODP
|
0
|
%
|
|
Carbon balance, life cycle analysis
|
1.55
|
Carbon Equivalent Kg
|
|
DIRECTIONS FOR USE
Use pure. Ready to use.
OPERATING INSTRUCTIONS
Use pure. Spray with a low-pressure device, without excess. Leave on for a few minutes.
NOTE: SOLVETAL DBA 200 is an excellent thinner of old asphalt that is recycled on worksites and used in new coatings. It is highly de-bituminizing for cleaning grinding machines.
PRESENTATIONS
|
Container GRV 1000 L
|
Drum 200 L
|
Can 20 L
|
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
- Please contact us -
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 
