English Francais
iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

2 FONCTIONS

Anti-stick and De-bituminizing

EMULSIFIABLE

for ASPHALT MIXING PLANTS

LOCATIERS SKIPS

 

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt. iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

2 functions

Can be used pure or diluted
Improves safety at work
Made from new generation vegetable-based esters

Fully biodegradable

 

  

Teneur en COV 0

1.55 Kg Carbon Equivalent

 

DESCRIPTION

SOLVETAL® DBE 250 is a concentrated fluid for the anti-sticking and de-bituminizing treatment, for the manufacture and transport of road surfaces.

SOLVETAL® DBE 250 is a cleaning fluid specifically developed to replace low flash point or smoke generating vegetable-based esters. It immediately meets the expectations of Branch Managers, Safety Coordinators and Operations Managers not only in terms of safety at work, hygiene and the environment, but also in terms of performance and compatibility with the equipment and its environment.

 

PHYSICAL AND CHEMICAL PROPERTIES

PROPERTIES

 STANDARDS

VALUES

UNITS

Appearance

 Visual

Liquid

-

Solubility in water

-

100

%

Colour*

 Visual

-

-

Odour

 Olfactory

Weak

-

Density at 25°C

 NF EN ISO 12185

885

kg/m3

Freezing point

 ASTM D 97

-33

°C

Kinematic viscosity at 40°C

 NF EN 3104

4.5

mm²/s

Refractive index

NF EN ISO 6320

1.4560

 

PERFORMANCE CHARACTERISTICS

PROPERTIES

 STANDARDS

VALUES

UNITS

De-bituminizing time

Internal method

5'30''

mn.sec

Fuel oil de-bituminizing time

Internal method

5'45''

mn.sec

FIRE SAFETY PROPERTIES

PROPERTIES

 STANDARDS

VALUES

UNITS

Vacuum flash point

EN ISO 2592

202

°C

Self-ignition point

ASTM E 659

>250

°C

Lower explosive limit

-

Non-explosive

% (v/v)

Upper explosive limit

-

Non-explosive

% (v/v)

Vapour pressure

-

<0.01

kPa at 20°C

Content of explosive, oxidizing, flammable, highly or extremely flammable substances

EEC Regulation

1272/2008 CLP

Total absence

-

TOXICOLOGICAL PROPERTIES

 

PROPERTIES

 STANDARDS

VALUES

UNITS

Iodine value

NF EN 14111

109

g/100 g

Totox (Anisidine Index + 2x Incide Peroxide)

-

09:56

-

Accelerated oxidability test (Rancimat test)

-      Flow rate

-      Temperature

-      Time

NF ISO 6886

 

 

10

100

2.6

 

 

L/h

°C

h

Content of toxic, very toxic, carcinogenic, mutagenic, reprotoxic, harmful, irritant or corrosive substances

EEC Regulation

1272/2008 CLP

Total absence

-

ENVIRONMENTAL PROPERTIES

 

PROPERTIES

 STANDARDS

VALUES

UNITS

Biodegradability

OECD TEST

301 B

Easily biodegradable

-

VOC (Volatile Organic Compounds) content

-

0

%

Solvent content

-

0

%

Environmentally hazardous substances content

EEC Regulation

1272/2008 CLP

Total absence

-

Download the data sheet

 

 

 

MSDS available on request

  

PRECAUTIONS FOR USE

Store under cover in temperate environments before use. Do not apply the product in large quantities or using a drum. Preferably use a sprayer. In case of any accidental spillage on newly laid surfaces, rinse the surfaces immediately and thoroughly with water. The primary function of this product is to remove bitumen. Do not apply to asphalt before and after laying. Use pure or diluted in water. Do not mix with fuel oil, which is classified as carcinogenic. Do not use as a bodywork detergent.

 

APPLICATIONS

FUNCTIONS SUPPORTS (equipments or hardware) concerned

Anti-stick

       ►Skips, shuttles or scraper conveyors for transporting asphalt

       ►Trucks skips

De-bituminizing

 

       ►Metal parts with bitumen

       ►Metal parts with grease

       ►Laboratory glassware with emulsion or bitumen

       ►Soiled clothes

       ►Soiled gloves

       ►Soiled shoes

       ►Bitumen filter

 

DIRECTIONS FOR USE

Use diluted for truck skip spray booms. To be used 30% in water or undiluted, determined according to the asphalt composition. For cleaning operations, use undiluted by spraying or brushing, leave to act and then rinse with water.

 

PRESENTATIONS

 

 

Container GRV 1000 L

 

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

 

 

 Drum 200 L 

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

 

 

 

  

 

 Can 20 L

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

 

ANTI-STICK READY-TO-USE

100 % VEGETABLE-BASED

 

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.   

Teneur en COV 0

1.55 Kg Carbon Equivalent

 

ASPHALT MIXING PLANTS

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

SUPPORTS (equipments or hardware) concerned

► Skips, shuttles or scraper conveyors for transporting asphalt

► Truck skips

 

 

CONSTRUCTION SITES

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

SUPPORTS (equipments or hardware) concerned

► Finisher table

► Profiler conveyor ledger

► Finisher feeder and feed screw

► Finisher belt

► Loader buckets carrying asphalt

► Sleds for CMA (Cold Mix Asphalt) machines

► Tools (scrapers, shovels, rakes, etc.)

► Manhole top plates

► Shoes

► Vibration plates

  

PHYSICAL AND CHEMICAL PROPERTIES

CLASSIFICATION :NONPOLAR AGROBASED SOLVENTS

PROPERTIES

 STANDARDS

VALUES

UNITS

Appearance

 Visual

Clear

-

Colour*

 Visual

Colourless to pale yellow

-

Odour

 Olfactory

Light

-

Density at 25°C

 NF EN ISO 12185

916

kg/m3

Freezing point

 ISO 3016

-12

°C

Solubility in water

 -

0

%

Kinematic viscosity at 40°C

 NF EN 3104

31

mm²/s

Surface tension

NF ISO 6295

28.7

Dynes/cm

Refractive index

NF EN ISO 6320

1.4740

 

Solvent power

Kauri Butanol index

ASTM D 1133

>220

-

Acid value

 EN 14104

<0.1

mg(KOH)/g

Iodine value

 NF EN 14111

<120

gI2/100g

Water content

 NF ISO 6296

< 0.2

%

FIRE SAFETY PROPERTIES

PROPERTIES

 STANDARDS

VALUES

UNITS

Flash point (vacuum)

 NF EN 22719

>170

°C

Self-ignition point

 ASTM E 659

>250

°C

Lower explosive limit

 -

Non-explosive

% (by volume)

Upper explosive limit

 -

Non-explosive

% (by volume)

Content of explosive, oxidizing, flammable, highly or extremely flammable substances

 CLP Regulation

GHS

Total absence

 %

TOXICOLOGICAL PROPERTIES

PROPERTIES

 STANDARDS

VALUES

UNITS

Anisidine value 

 NF ISO 6885

<5

-

Peroxide value

 NF ISO 3960

<10

meq(O2)/kg

TOTOX (anisidine value + 2x peroxide value)

 -

<25

-

CMR, irritating and corrosive substance content

 CLP Regulation

Total absence

 

 

Download the data sheet

 

 

 

MSDS available on request

 

DIRECTIONS FOR USE

Use pure. Ready to use. Easily distributed in asphalt plants equipped with automatic spraying systems for the treatment of skips. For plants that are not equipped, the hirers can treat the skips with a low-pressure sprayer.

 

PRESENTATIONS

 

 

Container GRV 1000 L

 

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

 

 

 Drum 200 L 

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

 

 

 

  

 

 Can 20 L

iBiotec SOLVETAL® de-bituminizing and anti-stick for road asphalt.

 

  

 

Manufacturing, lubrification, cleansing, protection,
IBiotec
® Tec Industries® Service
offers a wide range of products reserved for industrial area

 


 If you wish for :

 

a free sample
a technical advice
a product data sheet
a safety data sheet

 

Please contact us -

 


IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.



IBiotec® Tec Industries®Service is on : YOUTUBE